But these displays can introduce workplace hazards that employers may not encounter during the rest of the year. From electrical fires and overloaded circuits to trips and falls, holiday decorations can put employees and office visitors at risk. They can also create compliance issues under OSHA regulations and local fire codes.
Before decorating your workspace, plan carefully to ensure that decorations do not compromise workplace safety or interfere with emergency exits and fire protection equipment. Here’s how to get it right.
Rules to remember
While OSHA does not have a specific standard governing holiday decorations, several workplace safety regulations apply to their installation and use.
Under OSHA’s electrical standards (29 CFR 1910.305), temporary wiring is permitted for holiday decorative lighting for up to 90 days. However, extension cords generally cannot substitute for permanent wiring or be routed through walls, doorways or concealed ceiling spaces.
OSHA’s exit route requirements (29 CFR 1910.37) also mandate that exit routes remain unobstructed and that exit signs stay clearly visible.
Local fire codes may impose additional restrictions. For example, the International Fire Code limits combustible decorative materials on walls and ceilings in many commercial buildings. Requirements may vary by jurisdiction and building type.
Decorate safely
Before employees start decorating, employers should establish some basic safety guidelines:
Use ladders properly.
Never allow employees to stand on desks, tables or rolling office chairs to hang decorations. Provide appropriate ladders, ensure they are positioned securely and have someone assist when necessary. Employees should reposition ladders rather than overreach.
Keep walkways, emergency exits clear.
Remove decorating supplies, boxes and packaging promptly after decorating. Keep decorations away from exit corridors, exit signs, fire extinguishers, alarm pull stations and sprinkler heads. Decorations must not interfere with the operation of doors.
Choose tree locations carefully.
Consider using a fire-resistant artificial tree. If using a live tree, keep it watered and away from heaters, heat vents and other ignition sources. Check local fire codes, as they may prohibit live trees in some buildings.
Inspect holiday lights.
Use lighting certified by a recognized testing laboratory, such as UL or ETL. Check for frayed wires, cracked sockets and damaged plugs before installation. Replace defective strings rather than attempting makeshift repairs.
Manage electrical cords.
Never route cords through doorways or above suspended ceilings or hide them under a rug. Continuous foot traffic over a cord may damage its internal protection and lead to electrical fires or electrocution. Avoid connecting multiple extension cords or power strips together.
Prevent electrical shocks and reduce heat.
Use ground-fault circuit interrupter protection for outdoor decorations where required. Choose energy-efficient LED lighting, which generally produces less heat than traditional incandescent bulbs.
Turn off decorations.
Switch off decorative lighting when the workplace closes. Assign someone responsibility for checking displays before employees leave.
Monitor decorations throughout the season
Safety responsibilities do not end once decorations are installed. Periodically inspect displays for damaged wiring, loose decorations, blocked walkways and drying Christmas trees. Repair or remove hazardous decorations immediately.
Before decorating, check applicable local fire codes and building management requirements, particularly regarding combustible materials, sprinkler clearances and live trees.
